Skip to content

MIRA Safety CM-I01 Full-Face Respirator (40mm NATO)

MIRA Safety’s CM-I01 full face respirator takes any 40mm NATO filter. MIRA rates it for industrial and general use, not as a dedicated CBRN mask.

Ships from our US fulfilment network. Delivery & returns →

As an Amazon Associate, PrepperSource earns from qualifying purchases.

Category:

The CM-I01 is MIRA Safety’s working full face respirator, meant for the jobs people actually do around a house or a site: stripping insulation, spraying, cutting masonry, clearing mould, handling chemicals. It uses the same 40 mm NATO filter thread as the company’s CBRN masks, so filters are interchangeable across the range, but the facepiece is thermoplastic rubber rather than the bromobutyl used where blister agents are a concern.

Key features

  • Single 40 mm NATO filter port, Rd 40 x 1/7 inch, so most common filters fit
  • One-piece panoramic polycarbonate visor with a scratch-resistant coating, Class 1 optical rating to EN 166
  • Hypoallergenic oro-nasal cup that routes breath away from the lens to cut fogging
  • Five-point adjustable head harness in EPDM
  • Contoured thermoplastic rubber facepiece designed to seal across a range of face shapes
  • Ten-year shelf life, with a one-year manufacturer’s warranty

Specifications

  • Weight 571 g; one medium size
  • Facepiece thermoplastic rubber; visor polycarbonate; connectors polyamide; harness EPDM
  • Filter connection thread Rd 40 x 1/7 inch
  • Inhalation resistance 118 Pa; exhalation resistance 92 Pa
  • Class 3 certified to EN 136:1998 and Regulation (EU) 2016/425; made in Italy
  • Storage temperature minus 10 to 50 degrees Celsius; filters are not included

This suits someone who wants full face coverage for dusty, fume-laden or splashing work without paying for a dedicated CBRN mask. Take MIRA’s own caveat seriously: the company states plainly that the CM-I01 is designed for industrial and general use and is not a CBRN gas mask, because its face seal material is not resistant to blister agents. It will block many hazards with the right filter, but it is not the mask to rely on for chemical warfare agents. Two more things worth knowing before you buy. Prescription spectacles cannot be worn inside it, as the arms break the seal, and there is no spectacle kit for this model, so contact lenses are the answer if you need correction. And the Class 3 EN 136 certification is European, not a NIOSH approval. As with any tight-fitting mask, it has to seal against bare skin, so facial hair at the sealing surface defeats it, and it cannot help in oxygen-deficient air.