Skip to content

3M 6300 Half Facepiece Reusable Respirator (Large)

The large size of the 3M 6000 Series half facepiece we stock in medium. Takes the same 3M bayonet cartridges and filters, which are sold separately.

Ships from our US fulfilment network. Delivery & returns →

As an Amazon Associate, PrepperSource earns from qualifying purchases.

Category:

One facepiece, three sizes. 3M builds the 6000 Series as the 6100 in small, the 6200 in medium and the 6300 in large, and the difference between them is the shape and scale of the part that meets the face. We list the 6300 because a medium facepiece on a large face leaves a gap along the jaw or across the bridge of the nose, and air takes the gap in preference to the filter. It suits anyone the medium does not close against, and anyone buying for a household or a crew who cannot all be assumed to take a medium.

Key features

  • The large size of the 6000 Series facepiece, with the small sold as the 6100 and the medium as the 6200; all three take the same cartridges and filters, so only the fit differs
  • Cartridges and filters clip straight on with a quarter-turn bayonet fitting, needing no retainers, adapters or tools
  • The two ports sit low on the facepiece, which keeps them out of the lower field of view when you are looking down at your hands
  • A rigid dark grey body carries a softer thermoplastic elastomer sealing face, held by an adjustable cradle harness
  • Washable with warm water and soap, and designed to be replaced rather than rebuilt once the sealing face stiffens
  • Shares its cartridge and filter range with 3M’s 7500 Series half masks, so one stock of filters covers both

Specifications

  • Model 6300, size large; the 6100 is small and the 6200 is medium
  • Connection: 3M bayonet, quarter turn
  • Approval: NIOSH approved under 42 CFR Part 84. A bare facepiece carries no approval number of its own, because NIOSH approves the facepiece and filter together and the TC-84A number arrives on the label packed with the cartridge
  • Certified cartridge family: 3M 6000 Series cartridges with 3M 2000, 2200, 5000 and 7000 Series filters, for instance the 2091 P100 particulate filter, the 6001 organic vapour cartridge, or the 2097 P100 filter with nuisance-level organic vapour relief
  • Assigned protection factor 10
  • Supplied as the facepiece alone, with no cartridges or filters in the box; country of origin United States

Three things govern whether this protects you, and only one of them comes in the box. The first is size, which is the whole reason this listing exists: the right facepiece is the one that passes a fit test on your face rather than the one that matches your build, and in a US workplace OSHA requires that fit test before a tight-fitting respirator goes into use. 3M’s own guidance is to let the fit test decide, and we would rather say that than publish a measurement chart 3M does not. The second is the seal, on every single wear: run a positive and negative pressure check each time you put it on, and accept that a beard, or a few days of stubble under the sealing edge, makes the mask ornamental. The third is the cartridge. A P100 filter stops particulate and ignores solvent vapour; an organic vapour cartridge stops vapour and ignores lead dust; nothing in the range removes carbon monoxide; and no air-purifying respirator works in a space short of oxygen, because it filters the air it is handed rather than supplying any of its own.