Most elastomeric half masks sit well forward of the face. The Elipse does not: its two filter pods sit flat against the cheeks, which keeps the mask clear of a welding helmet, a face shield or a camera, and makes it far less intrusive to wear for long stretches. GVS makes the filters in Findlay, Ohio and tests every one against sodium chloride aerosol. The mask arrives with a pair fitted, so there is nothing else to buy to start using it.
Key features
- NIOSH approved P100 under TC-84A-6949, meeting 42 CFR 84
- Filters are included, replaceable and reusable; replacements are the SPR321 pair
- Low-profile pods clear welding helmets, face shields and eyewear
- Medical-grade thermoplastic elastomer body, free of latex and silicone, and odour free
- Four-point adjustable head and neck strap with a thermoplastic comfort pad
- Light enough to forget: under 140 grams with both filters in place
Specifications
- Model SPR457, size medium to large; SPR451 is small to medium and SPR1343 is extra large
- NIOSH approval P100 TC-84A-6949
- Filtration efficiency above 99.97 per cent at 0.3 micrometre particles
- Weight with filters fitted 4.86 oz, about 138 g
- Shelf life five years for mask and filters, stored as GVS specifies
- Made in Findlay, Ohio
This is the right mask for dust: silica and concrete dust, wood dust, grain dust, mould, metal fumes, lead fumes and fibreglass. It is the wrong mask for anything else. P100 is a particulate rating, so the Elipse offers no protection against solvent vapours, chlorine, carbon monoxide or any other gas, and a particulate filter in a room full of vapour protects against nothing. If gases are in play, use a cartridge respirator rated for them. Being a half mask, it leaves the eyes uncovered, so pair it with goggles where the hazard warrants. And it only works sealed to bare skin: a beard or stubble along the sealing edge will let unfiltered air in, whatever the filters are rated for. It is not for oxygen-deficient air or conditions immediately dangerous to life or health.




