The 8210 is 3M’s long-running cup-shaped filtering facepiece and a sensible thing to keep a box of. It suits sanding, sweeping, insulation work, clearing a dusty loft and the fine debris that follows storm damage. It is a genuine NIOSH-approved N95 under 42 CFR Part 84, not a look-alike: the approval number TC-84A-0007 is printed on the respirator itself, and you can check it against the NIOSH Certified Equipment List.
Key features
- NIOSH-approved N95 under approval number TC-84A-0007, filtering at least 95 per cent of airborne particles that do not contain oil
- Moulded cup shape holds its form against the face rather than collapsing onto the lips
- Adjustable aluminium nose clip with a foam cushion to close the gap either side of the bridge
- Two welded head straps, worn over the crown rather than looped round the ears
- No exhalation valve, so exhaled air is filtered as well as inhaled air
- Twenty respirators per box, standard size, made in the USA
Specifications
- Filter class N95, 3M 8000 cup series, model 8210
- NIOSH approval number TC-84A-0007
- Exhalation valve: none. Strap attachment: welded, two non-adjustable straps
- Size: standard (medium or large). Contains no natural rubber latex
- Not flame resistant and not fluid resistant
- Twenty per box
Two honest limits. First, a disposable respirator only works if it seals: it must be moulded to the nose with both hands and seal-checked each time you put it on, and facial hair crossing the sealing surface defeats it completely, however carefully you fit it. Second, the N in N95 means not oil-resistant, and a particulate filter does nothing at all against gases or vapours, which need cartridges on a reusable half mask. Within those limits a filtering facepiece is rated to ten times the permissible exposure limit and no further. 3M labels the 8210 for occupational use, where a written respiratory programme and annual fit testing apply.




