Skip to content

BRK SC9120B Hardwired Smoke and Carbon Monoxide Alarm with Battery Backup

BRK SC9120B combination alarm: ionisation smoke sensing and an electrochemical CO sensor, 120V with 9V backup, ten-year alarm life, UL 217 and UL 2034.

Ships from our US fulfilment network. Delivery & returns →

As an Amazon Associate, PrepperSource earns from qualifying purchases.

Category:

The SC9120B puts smoke detection and carbon monoxide detection in a single hardwired unit, which keeps ceilings tidy and halves the number of devices to maintain. It carries a dual ionisation smoke sensing chamber and a separate electrochemical carbon monoxide sensor, with an 85 dB horn, a silence feature for nuisance alarms and interconnection to other BRK and First Alert hardwired devices.

Key features

  • Two sensors in one unit: dual ionisation for smoke, electrochemical for carbon monoxide
  • 120V AC 60Hz with a 9V alkaline battery backup
  • Interconnects with up to eighteen devices, twelve of which may be smoke alarms
  • Latching alarm indicator shows which unit initiated the alarm; silence button for nuisance alarms
  • Ten-year carbon monoxide sensor and ten-year alarm life, with an audible end-of-life signal
  • Quick-connect harness, gasketless mounting base and a construction dust cover

Specifications

  • Smoke sensor ionisation; carbon monoxide sensor electrochemical
  • Operating voltage 120V AC 60Hz with 9V alkaline battery backup; 0.09 A standby and alarm
  • Audible alarm 85 dB at 10 ft
  • 5.6 in diameter by 2.0 in high; weight 8.5 oz
  • Operating range 40 to 100 degrees F, 10 to 95 per cent relative humidity
  • Complies with UL 217, UL 2034, CSFM, NFPA 72, NFPA 720, HUD and FHA

This suits a home being wired for interconnected alarms where carbon monoxide cover is wanted on the same circuit, and it is specified often enough in multi-family buildings for that reason. The caveats: it is hardwired, so a 120V supply and junction box are needed at each position, and interconnection needs a three-conductor run. Its smoke sensing is ionisation, which answers fast flaming fires more quickly than smouldering ones, so it is worth pairing with photoelectric alarms elsewhere in the house. Both the alarm and its carbon monoxide sensor are rated for ten years, after which the whole unit is replaced rather than repaired. The unit carries First Alert markings because BRK and First Alert are the same manufacturer, BRK Brands.