The Anker SOLIX C1000 Gen 2 solar generator pairs a 1,024Wh power station with a 200W bifacial folding panel, so it arrives ready to recharge itself without a wall socket. The station is the fast one in Anker’s range: 2,000W of continuous output across five AC outlets, 3,000W peak, and a 49-minute refill from empty when UltraFast charging is enabled in the app. At 24.9 lb it is noticeably lighter and smaller than the first-generation C1000.
Key features
- Solar panel included: a 200W bifacial monocrystalline panel rated up to 23% conversion efficiency, with an IP67 weather rating.
- 2,000W continuous and 3,000W peak output, across five 120V AC outlets.
- Ten ports in all, including two 140W USB-C, a 15W USB-C, a 12W USB-A and a 12V/10A car socket.
- 4,000 cycles to 80% capacity, which Anker frames as ten years of daily use.
- Under 10ms uninterruptible switchover, enough to keep a CPAP machine or a desktop running.
- Accepts up to 600W of solar through its MPPT input, so more panels can be added later.
Specifications
- Capacity: 1,024Wh, LiFePO4; not expandable with extra batteries
- AC output: 2,000W continuous, 3,000W peak, 120V/60Hz
- Input: 1,200W standard AC, 1,600W UltraFast, 600W solar (11V to 60V MPPT)
- Weight: 11.3kg (24.9 lb); dimensions 15.12 x 8.19 x 9.61in
- In the box: C1000 Gen 2, PS200 200W solar panel, AC charging cable, quick start guide
Be clear about what the bundled panel can do. The station accepts 600W of solar and Anker’s 1.8-hour full solar recharge assumes that much panel; the single 200W panel supplied here is a third of that, so expect the best part of a day in strong, direct sun and considerably longer in cloud or at a poor angle. The 49-minute wall charge also needs UltraFast mode turned on in the app. A 1,024Wh pack suits a fridge, lights, a router and device charging through an outage, not a whole house, and it cannot be expanded with an extra battery later.




