Zip ties are the quiet workhorse of a toolbox: cheap enough to use freely, strong enough for most of what you ask of them, and far quicker than cord when you need twenty fixings in a row. These are TR Industrial’s multi-purpose ties in the 8 inch length, a hundred to the pack, in the black ultraviolet-stabilised grade meant to live outside. They suit anyone kitting out a vehicle, a generator shed or a workshop drawer.
Key features
- Moulded in nylon 6/6 rather than nylon 6, chosen for better heat and chemical resistance
- Black with an ultraviolet stabiliser, so they hold up outdoors where natural nylon ties go brittle
- UL listed under file E243263
- Self-locking pawl that pulls tight one-handed and holds without slipping back
- A hundred ties to the pack, enough for a whole job rather than a single fix
- TR Industrial makes the same tie in 4, 12 and 14 inch lengths, and from 18 to 48 inches for larger bundles
Specifications
- Length 8 in
- Material nylon 6/6
- Colour black, ultraviolet resistant
- Quantity 100 a pack
- Maximum working temperature 85°C (185°F)
- Approval: UL listed, file E243263
One honest gap. TR Industrial publishes a tensile rating of 18 lb for the 4 inch tie in this range but does not publish a figure for the 8 inch, so we are not going to print one. If a stated loop strength matters to the job, buy a tie that carries one on its own label. More generally, a cable tie’s rated tensile is a minimum break value from a straight loop pull in a laboratory, not a working load limit; in service, plan on a fraction of it. Nylon 6/6 takes up moisture, softens as it warms, and loses strength under ultraviolet light and repeated loading, and a tie that has been pulled tight once is a single-use item. For anything that matters, use a tie rated well above the load, and look at it from time to time.




