Infrared heaters warm objects and people in their path rather than heating the whole volume of air first, so a room feels warmer sooner than the thermometer suggests. The DR-968 pairs a quartz infrared tube with a ceramic element rated for 100,000 hours of use, and runs them behind a wood cabinet that stays cool enough to touch. A quiet multi-blade fan, quoted at 39 decibels, moves the heat out without the noise of a conventional fan heater.
Key features
- Dual heating: quartz infrared tube plus a ceramic (PTC) element, rated for 100,000 hours
- Thermostat adjustable from 50 to 86 F, with auto, high and low modes on an LED display
- Programmable timer, settable up to 12 hours for automatic shut-off
- Tip-over shut-off and automatic overheat protection
- Cool-touch cabinet and a 6 ft grounded three-pin cord
- Remote control and washable electrostatic filter supplied; UL listed, with a three-year limited warranty
Specifications
- Power: 1,500 W at 110 to 120 V, 12.5 amps
- Heat output: approximately 5,200 BTU per hour
- Fuel: none, mains electric, so no combustion and no carbon monoxide
- Rated area: up to 1,000 sq ft as supplementary heat
- Size: 17 in high x 12.5 in wide x 13 in deep
- Weight: 25 lb; indoor use only
Treat the 1,000 sq ft figure for what it is. Any heater on a household socket is limited to about 1,500 W, which is roughly 5,200 BTU per hour, and that will take the chill off a large room or hold a warm one warm. It will not heat 1,000 sq ft from cold on its own, whatever the coverage number suggests, and no plug-in heater of any brand will. Within those limits it is a sound choice for a room you occupy for hours at a time, and the infrared element is pleasant to sit near. Plug it directly into a wall socket rather than an extension lead, keep furniture and fabric clear of the front, and remember that it needs mains power, so it is a companion to a fuel-burning or battery-free heater in an outage, not a replacement for one.




