A plain green polyethylene tarp, 8 mil thick and 8 by 10 ft. This is the sort of thing worth owning two of: a groundsheet under a tent floor, a lean-to over a ridgeline, a cover for firewood or a bicycle, a sheet to lay kit out on while you sort it. CARTMAN quotes 8 by 10 ft as the finished size, which matters, because many poly tarps are sold at their cut size and lose several inches to the hem.
Key features
- Finished size 8 x 10 ft, measured after hemming rather than before
- 8 mil material: heavier than a disposable decorator’s sheet, lighter than a lorry tarpaulin
- Reinforced edges with grommets round the perimeter for guy lines or bungee cords
- Waterproof, UV-resistant and rip-resistant, to the maker’s own statement
- Folds flat, takes rough handling, and lives happily in a car boot or a garage
Specifications
- Finished size: 8 ft x 10 ft (2.44 x 3.05 m)
- Thickness: 8 mil (about 0.2 mm)
- Material: polyethylene
- Colour: green
- Edges: reinforced, with grommets set round the perimeter
It is worth being clear about what a poly tarp is. There is no hydrostatic head figure for it, because it is a laminated plastic sheet rather than a coated fabric: water does not pass through it at all until the sheet is punctured or a grommet tears out. The trade-off is that it does not breathe, so anything under it collects condensation, and at 8 mil the grommets are the weak point under a hard pull. Rig it with the line passed through a grommet and taken round a stone or a toggle rather than hanging the whole load on one eyelet. It is a camp and yard tarp, heavy for its size, and not a lightweight backpacking tarp.




