Fatwood is the resin-saturated heartwood left in the stump of a pine after the tree dies, and it is the oldest natural tinder there is. The resin is what does the work: it catches from a flame readily, burns hot and keeps burning when ordinary kindling has given up. Billy Buckskin harvest theirs from the stumps of dead, non-endangered pine in Mexico, so no living trees are felled for it, and they add nothing to the wood.
Key features
- Two or three sticks are enough to start a fire, so a 10lb box lasts a long season of fires.
- High natural resin content means the sticks light readily and go on burning when wet, in snow or after rain.
- No added man-made chemicals, no accelerants and no scent, which matters if you cook over the fire.
- Works in an indoor fireplace, a wood or pellet stove, a charcoal chimney, a fire pit or a campfire.
- Split sticks rather than shavings, so you can shave your own fine curls off one with a knife when you need finer tinder.
Specifications
- Box weight: 10lb (about 4.5kg)
- Stick length: approximately 8in (about 20cm)
- Stick thickness: three-quarters to one inch (about 19 to 25mm)
- Suggested use: 2 to 3 sticks per fire
- Material: 100 per cent natural resinous pine stump wood, no added chemicals
- Source: stumps of dead, non-endangered pine
This is the tinder to pair with a ferro rod or a lighter, and it suits anyone who lights real wood fires often enough to want a box rather than a packet. Two honest points. Billy Buckskin do not publish a burn time per stick, and their own guidance is that it varies with the size of the stick, how much resin is in that particular piece and how much air reaches it, so treat any fixed figure you see elsewhere with suspicion. And fatwood is not instant: a single spark will rarely take a whole stick, and you may need to hold a flame on one spot for a few seconds until the resin starts to run. Shave fine curls off a stick if you are working from a ferro rod. The resin also produces a black smoke as it burns, which is normal for the material.




