Skip to content

Anker Power Bank A1383 (20,000mAh, 87W, Built-In USB-C Cable)

A 20,000mAh Anker power bank with the USB-C cable built in, 87W shared across three devices and up to 65W to one. Refills in about 90 minutes.

Ships from our US fulfilment network. Delivery & returns →

As an Amazon Associate, PrepperSource earns from qualifying purchases.

A 20,000mAh pack with the USB-C cable stowed in a channel along its side, so charging needs nothing you might have left at home. This is the size that suits a go-bag or a glovebox: several phone charges, or one laptop top-up, without the bulk and weight of a laptop-class pack.

Key features

  • The built-in USB-C cable tucks into the body and is rated by Anker for more than 10,000 bends.
  • 87W shared across three devices, with up to 65W to a single device, which is enough for a 14-inch MacBook Pro.
  • Refills in about an hour and a half from a 65W charger, so it is ready again the same evening.
  • A small display reports the charge remaining.
  • Light enough at 439g to be carried daily rather than left in a drawer until it is needed.

Specifications

  • Rated capacity: 20,000mAh
  • Outputs: built-in USB-C cable, a USB-C port and a USB-A port; three devices at once
  • Total output: 87W, with a single-device maximum of 65W
  • Recharge: about 1.5 hours with a 65W charger
  • Size and weight: 157.5 x 73.7 x 25.4mm, 439g
  • Warranty: 18 months

The usual caveat about capacity applies here too. Twenty thousand milliamp-hours is measured at the cells’ nominal voltage, so expect roughly two thirds of it to reach your phone once conversion losses are taken out. Anker does not publish a watt-hour figure for this model; 20,000mAh at the cells’ nominal voltage works out near 72Wh, comfortably inside the 100Wh ceiling airlines apply to spare batteries carried in the cabin. The built-in cable is USB-C, so older Lightning devices need an adapter.