Skip to content

Power Outage Flashlight: Make Sure You Can Find and Use It in the Dark

A black and silver torch casts light across a pale tabletop.

Put a working flashlight where each person can find it when the power goes out. Try its switch from the position where you would normally reach for it. Then check the exact replacement batteries or approved charging setup. Ready.gov recommends having flashlights for every household member and planning for battery and alternative power needs in advance. Ready.gov power outage guidance

Start from where you will be when the lights go out

Choose a starting place, such as beside a bed or near where someone spends the evening. Put the torch in a location that person can reach without searching other rooms. Agree where it goes after use, and show the other people in the household how to return it to that spot. A shelf may be easy for one person to reach and too high for another. Try the exact placement with the person who needs it and keep the approach clear.

With normal room lighting available, ask each person to practise locating the flashlight and switching it on. Check whether they can identify it by touch or with a label, hold it as intended and use the controls. Ready.gov suggests Braille or large-print labels for emergency supplies for people who are blind or have low vision. Ask the person which marking or placement helps them. Ready.gov preparedness for people with disabilities

Match the power supply to the exact flashlight

Read the markings on the device or its instructions. Record what power it uses, where to find compatible spares and how to check or charge it. For a rechargeable light, test the actual cable and charging source in advance. If you plan to rely on a power bank, confirm that the two devices work together. Keep the equipment instructions with the record. Use only the battery types or charging method the maker specifies. Ready.gov power outage guidance

Try the mode you expect to use. Check that it gives you enough light for a particular task, such as reading a label or finding your next item. If you compare published runtime figures, check the mode, power source and conditions the maker used. Record unanswered questions instead of assigning a runtime based on a brightness label. If someone needs both hands for another task, check whether an alternative is appropriate. The National Park Service gives hands-free use as a reason for choosing a headlamp outdoors. National Park Service Ten Essentials

Record a flashlight readiness check

Check Record
Assigned person and starting place Who needs the light and where they would be
Reach Exact place the person can find it
Switch How to turn it on and select the intended setting
Power Exact compatible battery or charging arrangement
Backup Where the spare power or second light is kept
Check date What you tried and the next action

For example, two adults keep one torch in a hall drawer and one in a bedside cupboard. During the check, one person has to leave the bedroom to get to the hall drawer. They move that torch to a known place they can reach from the bedroom. A spare cable also turns out to fit only one of the two lights. They label the correct cables and set a reminder to check the charge. They can now record what each person actually located and operated. Ready.gov power outage guidance

Check shared communication separately. Ready.gov recommends a battery-operated lantern for communication by sign language or lip reading during an outage. If people in your household would use that arrangement, check the space and where the lantern will sit with them. Follow current local directions about the outage, including instructions about heating or cooling locations during extreme temperatures. Ready.gov preparedness for people with disabilities and Ready.gov power outage guidance

Power outage flashlight questions

How many flashlights should we have?

Ready.gov advises having one available for every household member. Check who can retrieve and use each light and what assistance someone may need. Ready.gov power outage guidance

Where is the best place to keep mine?

Choose a consistent place you can reach from where you normally are. Check it in ordinary lighting and confirm other household members know where it goes after use.

Do I need a high-output flashlight?

Try the setting you would use for the actual task. Choose controls and an output that you can operate, and compare manufacturer figures only under like conditions.

How can I check if a rechargeable light is ready?

Test the light and the exact charging setup. Record how you will check the charge and where to find the cable or compatible backup power during an outage. Ready.gov power outage guidance

Test one flashlight from its usual place

Find it, switch it on and locate its spare batteries or cable. Fix any one problem with access, controls or power before returning the light to its place.

Explore emergency lighting guides