Skip to content

Emergency lanterns for home use: Compare the mode you need

Lit portable lantern on a sitting-room table beside an open book
AI-generated editorial illustration

Choose a home emergency lantern by matching its light setting to one task and the time you expect to use it. The Goal Zero Lighthouse 600 and Lighthouse Micro Flash manuals list different runtimes for one-side and both-sides operation. Compare the rows separately and try the actual light in the place you intend to use it. Goal Zero Lighthouse 600 user guide · Goal Zero Lighthouse Micro Flash user guide

Compare the maker’s lantern modes

Lantern mode Lighthouse 600 listed runtime Micro Flash listed runtime and output
One side low 320 hours 170 hours at 10 lumens
One side high 5 hours 15 hours at 75 lumens
Both sides low 180 hours 80 hours at 20 lumens
Both sides high 2.5 hours 7 hours at 150 lumens

Goal Zero lists a 600-lumen output specification for the Lighthouse 600. Its manual does not assign an individual output figure to each runtime row. The 320-hour entry describes one side on low. The Micro Flash table includes different figures for its separate flashlight mode. Check what each setting does in the actual space. Goal Zero Lighthouse 600 user guide · Goal Zero Lighthouse Micro Flash user guide

Check charging separately from device output

The two manuals list USB charging input at 5 V and up to 1 A. The Lighthouse 600 also lists USB output at 5 V and up to 1.5 A, or 7.5 W. Check the actual device and cable before relying on that output. The maker tables do not establish lantern runtime while the 600 charges a separate device. Both manuals give a three-to-six-month shelf-life recharge entry. The Lighthouse 600 FAQ separately recommends charging every three months. Goal Zero Lighthouse 600 user guide · Goal Zero Lighthouse Micro Flash user guide

Check the lantern where it will work

Household check What to record
Place and task Where you will put the light and what people need to see
Mode One side or both sides, and the setting that works for the task
Planned time How long the light will be needed and the corresponding maker row
Charge Last recharge and the actual compatible source
Open question Coverage, battery condition or another device that still needs checking

For example, a household wants to read at a table and share a light from both sides. It tries one side and then both sides in the actual position. It checks the relevant maker row and decides separately how it will charge phones. The trial checks what they can see. It does not establish how long the light will run in an outage.

Check one place and one mode

Set the light where you plan to use it, try the setting and record the matching runtime row. Check the charging source before you put it away.

Explore emergency lighting guides