USGI Industries is a veteran-owned American outfit making civilian versions of standard-issue military kit, and this is its rain poncho: 62 inches wide by 82 inches long, which covers most adults from the hood to below the knee with width to spare for a loaded pack underneath. Unlike many poncho makers, USGI publishes a hydrostatic rating for the coating, which makes it easier to judge what the fabric will actually do in prolonged rain.
Key features
- Polyurethane coating rated to 3,000 mm, so it holds out steady rain rather than light drizzle only
- Eight metal grommets give tie-out points for an A-frame, lean-to, ground tarp or hammock rain cover
- Sixteen snaps close the sides so it wears more like a coat than a sheet
- Hood adjusts with a drawstring and has a 9 in neck opening
- Ripstop weave keeps a small snag from running
- Pairs with the USGI poncho liner, which ties in through the same grommets
Specifications
- Fabric: 210T ripstop polyester, polyurethane coated
- Waterproof rating: 3,000 mm
- Open size: approximately 62 in wide x 82 in long
- Hardware: 8 metal grommets, 16 snaps
- Packed size: approximately 6 x 8 x 3 in in the included stuff sack
- Patterns: OCP Multicam, MARPAT, Woodland, ACU, Coyote, OD Green, Jet Black, Orange and Arctic Blue
A sound pick for anyone who wants one item that is both rain cover and shelter material, and the grommet pattern is what separates it from a simple rain cape. Two caveats. Care is restrictive: hand wash cold and hang dry only, because heat degrades the polyurethane coating, so no tumble drier and no iron, and it is best stored dry and loosely folded rather than compressed for months. And a 3,000 mm rating describes the coating, not the garment: a poncho remains open at the sides, so in wind-driven rain you will still get wet at the flanks. Judge it as a versatile rain and shelter layer, not as a replacement for a fitted waterproof.




