Where a radiant model aims heat at one part of a room, a convection heater stands in the middle of the space and warms it from all sides. The HMC-23K is the larger of Sengoku’s HeatMate kerosene heaters: a cylindrical burner inside a full chrome cage, lit by push button, with no mains power and no chimney. Sengoku’s own figure is 23,500 BTU, slightly above the 23,000 that some retail listings quote, and the maker is the one to believe.
Key features
- Convection heating from a central cylindrical burner, radiating through 360 degrees
- No mains power and no matches needed: push-button ignition
- Automatic safety shut-off and a tip-over switch, both listed by Sengoku
- Full guard cage around the burner, with a carry handle on each side
- Wick-height dial from low to high, a manual shut-off lever and a window to watch the flame
- Fuel gauge set into the tank base, under a two-year limited manufacturer’s warranty
Specifications
- Output: 23,500 BTU (6.9 kW), convection
- Heated area: up to about 1,000 sq ft (93 m²)
- Tank: 1.9 US gallons (7.19 litres), about 12 hours per fill
- Dimensions: 18.5 x 18.5 x 25.5 in (470 x 470 x 648 mm)
- Weight: 22 lb (10 kg)
- Fuel: 1-K kerosene only, as printed on the heater itself
The caveat is the same one that governs every unvented kerosene heater, and it is not a formality. This burns fuel in the room: it consumes oxygen and it produces carbon monoxide, which you cannot smell. Sengoku rates the HMC-23K for indoor and outdoor use and lists an automatic safety shut-off and a tip-over switch. It does not list an oxygen-depletion sensor, so do not assume there is one. Run it only with ventilation, only where a working carbon-monoxide alarm is fitted, and only on 1-K kerosene, never petrol, which Americans call gasoline. Refuel outdoors with the heater cold, and give it clearance on every side, because unlike a radiant heater this one puts out heat all round. Check local rules too, as some US jurisdictions restrict unvented kerosene heaters indoors.




