Skip to content

Prime-Line U 10827 Door Reinforcement Lock (Satin Nickel)

Prime-Line’s U 10827 flip-over lock screws into the frame of an inward-swinging door. Prime-Line states it is designed to withstand 800 lb of force.

Ships from our US fulfilment network. Delivery & returns →

As an Amazon Associate, PrepperSource earns from qualifying purchases.

Category:

A palm-sized aluminium plate that screws to the frame beside the door, with a spring-loaded arm that flips across the opening. With the arm down the door cannot swing in, whatever happens to the handle or the cylinder. It is the cheapest meaningful hardening most front doors can be given, and it goes on with a screwdriver and a drill in about ten minutes.

Key features

  • Spring-loaded arm flips over and releases with one finger
  • Fits any inward-swinging door, of any thickness
  • Works independently of the lock, so picking or bumping the cylinder achieves nothing
  • Supplied with 3 in hardened screws that reach past the trim into the frame
  • Mounted high on the door it sits out of reach of small children
  • Satin nickel anodised finish

Specifications

  • Model U 10827, sold under the Defender Security name
  • Material: aluminium with a satin nickel anodised finish
  • Plate 2-3/16 in high by 1-3/8 in wide, 2-7/16 in overall depth, 3 in stop
  • Prime-Line states the lock is designed to withstand 800 lb of force
  • Supplied with 3 in hardened screws; 1/8 in pilot holes required
  • Warranty: one year against manufacturing defects

The 800 lb figure is Prime-Line’s own and carries no independent grade or certification. In practice the holding strength is set by what is behind your trim: screws that bite into solid framing matter more than the lock does, and a frame that is already soft will not be rescued by it. It can only be engaged from inside, so it guards you while you are at home and leaves an empty house to the deadbolt. Pre-drill the pilot holes, go gently with a driver so the hardened screw heads do not strip, and expect that some doors need a shallow mortise for the plate to sit flat.