Duct tape earns its place in a kit by being the thing you reach for when something has to hold until you can mend it properly. DT8 is the general-purpose grade of 3M’s duct tape family: a black cloth tape 1.88 inches wide, supplied here as three 60-yard rolls. It suits anyone who would rather have a known quantity from a named maker, with published figures behind it, than an unmarked roll of uncertain thickness.
Key features
- Polyethylene film laminated to a woven cloth scrim, so it tears cleanly across the width by hand
- Natural and synthetic rubber adhesive blend that bonds on contact to metal, glass, plastic and sealed concrete
- The most stretchable tape in 3M’s duct tape range, which is what makes it conform over curved and irregular surfaces
- Resists curling at the edge and comes off the roll without splitting
- Three rolls of 60 yards gives about 180 yards in the pack
- Also made in silver, if you would rather the repair showed
Specifications
- Width 48 mm (1.88 in); length 54.8 m (59.9 yd) a roll
- Total thickness 0.2 mm (8 mil)
- Tensile strength 42 N/cm, roughly 24 lb per inch of width
- Adhesion to steel 74 oz per inch of width
- Elongation at break 19 per cent
- 76.2 mm (3 in) core; 12-month shelf life; 3M product number 7100174104
Read the grade honestly. Some listings describe this tape as industrial strength, but the roll itself is printed General Purpose, and 3M positions DT8 as an all-purpose tape, pointing to its Heavy Duty DT11 where more strength is wanted. 3M lists DT8 for indoor use, says to apply it above 40°F, and rates it to 150°F for no more than about thirty minutes; it is also labelled for industrial and occupational use rather than consumer sale. Inside those limits it is a dependable patching, bundling and marking tape. It is not a structural fix, and it is not the roll to choose for a wet outdoor repair that has to last a season.




