This is a motion sensor light switch that replaces an ordinary wall switch: it turns the light on when it senses someone come in, and off again a set period after the room empties. It suits the places where a light quietly burns for hours unnoticed, such as a garage, a basement, a utility room, a pantry or a stair landing, and it means a light you never have to find in the dark with your hands full.
Key features
- Switches lights on automatically when it senses motion, and off once the room is empty
- Tap the paddle at any time to take manual control
- Adjustable delay before switching off: 1, 5, 15 or 30 minutes
- 180 degree field of view, covering up to around 900 sq ft for major motion
- UL listed for use with LED, compact fluorescent, incandescent and halogen lamps
- Fits a standard wall box behind a normal faceplate
Specifications
- 120 V, 2 A lighting load
- Single-pole only
- Passive infrared sensing
- Coverage up to 900 sq ft (30 x 30 ft) major motion, 400 sq ft (20 x 20 ft) minor motion
- Suggested mounting height around 4 ft
- Lutron Maestro 2 A single-pole motion sensor switch
Two things to check before you order. It is single-pole only, so it cannot go into a circuit where two switches control the same light: a landing or a long hallway with a switch at either end needs a different model. And it replaces a switch, which is mains wiring work. The box needs either a neutral or a ground connection for the sensor to run, and if that is not something you are confident doing, have an electrician fit it. The 2 A rating is the lighting load it will carry, which is generous for LED but worth checking against an older halogen fixture. Lutron supplies this switch in several finishes; the photograph shows the white version, so check the finish on the listing before ordering if it has to match existing plates.




