The KN-COB-B-LPM is Kidde’s plain battery-operated carbon monoxide alarm, part number 9CO5-LP. It uses an electrochemical sensor, the type used in domestic CO alarms, and runs on three AA cells supplied with it. Because it needs no mains supply it can sit on a shelf or be wall-mounted anywhere a bedroom, a hallway or a room with a fuel-burning appliance needs covering, and it goes on working when the power does not.
Key features
- Electrochemical carbon monoxide sensor
- Runs on three AA batteries, included, so protection continues during a power cut
- Green LED flashes every 30 seconds to show normal operation; a red LED pulses with the alarm pattern of four beeps, then five seconds of silence
- 85 dB alarm at 10 ft, with a test and reset button and a low-battery signal
- End-of-life alert tells you to replace the unit after ten years of operation
- Battery lockout and a slide-out battery door, so the cover will not close without cells fitted
Specifications
- Sensor: electrochemical; power: three AA batteries, included and replaceable
- Audible alarm 85 dB at 10 ft
- 4.5 in long, 2.75 in high, 1.5 in deep; weight 0.5 lb
- Operating range 40 to 100 degrees F, 10 to 95 per cent relative humidity, non-condensing
- Not interconnectable with other alarms; Kidde’s data sheet states a ten-year life
It suits anyone who wants carbon monoxide cover without wiring, and particularly a rented home, a caravan or a spare room. Be clear on what it is not. A carbon monoxide alarm is not a smoke alarm, and a household needs both. This model has no digital readout, so it will not show you a figure in parts per million; it warns with its lights and its horn. The sensor ages whether or not it has ever alarmed, so replace the whole unit at ten years or when it sounds its end-of-life alert. If it does sound, move everyone into fresh air first and call for help from outside, before going back in to look for the source.




