The 88P is VIAIR’s long-standing mid-range portable compressor, and it is the one to reach for when the job is bigger than a car tyre: a four-wheel-drive brought back up to road pressure after a day on sand, a trailer tyre, or a van. A 16 ft air hose, a brass twist-on chuck, a carry bag and a three-piece tips kit come with it, so there is nothing else to buy.
Key features
- 120 PSI maximum working pressure, with a 25-minute duty cycle at 30 PSI
- Powered through battery clamps, so it is not limited by an accessory socket fuse
- 16 ft air hose and a 10 ft power cord, enough to reach any tyre without moving the unit
- Solid brass twist-on tyre chuck, an LED work light and a 120 PSI dial gauge
- Rated for tyres up to 33 inches, and supplied with a Presta valve adaptor
- Packed in a carry bag with a three-piece inflation tips kit
Specifications
- Maximum working pressure: 120 PSI; free flow 1.97 CFM at 0 PSI
- Duty cycle: 25 minutes at 30 PSI
- Power: 12 V permanent magnet motor, maximum draw 20 amps
- Ingress protection: IP53; ambient range minus 20 to 70 degrees Celsius
- Dimensions: 9.8 x 3.2 x 5.6 in; weight 4.75 lb
- Noise: 81 dB at 0 PSI
Two things to plan for. It draws up to 20 amps and connects by battery clamps rather than a socket plug, so you need access to the battery terminals, and with the engine off a long inflation will draw down the same battery you may need to start on. The gauge is an analogue dial with no automatic cut-off, so set your pressure with a separate gauge you trust and stay with the unit while it runs; VIAIR now sells a digital version of the same compressor for anyone who would rather set it and walk away. The duty cycle is a genuine limit rather than a formality, so give it time to cool between tyres.




