Waterproof Map Case: Check the Paper Fit, Closure and Test Conditions

Start with the paper you want to read, the size of the section you want visible and how often you need to open the case. A broad map and a small folded route card make different demands. Use a manufacturer’s size chart to narrow your options, then check the opening and usable space with the paper you actually carry. Compare the maker’s water-exposure conditions for the exact case, including how it has to be closed. Sea to Summit TPU Guide Map Case and Sea to Summit TPU Accessory Case
Compare the two closures and size charts
Sea to Summit describes its Guide Map Case as a welded TPU case with a press-lock closure, corner anchors and a detachable strap. It describes the welded TPU Accessory Case as a roll-top pouch with a folding closure and double hook-and-loop fasteners. The choice affects how you open the case and how much room you need to close it after inserting the paper. Use the directions supplied with the exact item for closing it. Sea to Summit TPU Guide Map Case and Sea to Summit TPU Accessory Case
| Model and size | Maker-listed dimensions | Weight in the maker’s size chart |
|---|---|---|
| Guide Map Case S | 2.5 × 21 × 27.5 cm | 56 g |
| Guide Map Case M | 2.5 × 28 × 30 cm | 78 g |
| Guide Map Case L | 2.5 × 33 × 39.6 cm | 102 g |
| Accessory Case S | 1 × 10.5 × 13.5 cm | 22 g |
| Accessory Case M | 1 × 13 × 22.5 cm | 28 g |
| Accessory Case L | 1 × 15 × 21.5 cm | 34 g |
Sea to Summit TPU Guide Map Case and Sea to Summit TPU Accessory Case
Use the chart weight as labelled. Keep it separate from any packed-weight figure on the same page. Also compare both dimensions rather than treating the letter size as a progression in every direction. The accessory chart’s M is longer than its L on one axis, while L is wider on the other.
Measure what you need to see and access
Lay the paper flat and mark the part you need to read while the case is closed. Fold along lines that leave the relevant route, legend and written directions visible. Measure the folded width, length and thickness. When you have a candidate in hand, check the opening and space with the fold in place, leaving enough room for the closure to work.
For example, a household wants a 16 × 23 cm section of a road map visible and also has a smaller folded contact card. The Accessory Case options in the chart are narrower than 16 cm. The small Guide Map Case has a listed 21 × 27.5 cm outline across its face, so it is a candidate to try. The household still needs to test the actual opening and clear area. They can check the smaller contact card separately. A smaller fit matters only if the person retrieving it can read it and close the case as directed. Sea to Summit TPU Guide Map Case and Sea to Summit TPU Accessory Case
Read the maker’s water claim with its conditions
Sea to Summit lists IPX8 testing for the Guide Map Case at 10 metres for one hour. For the Accessory Case it describes testing under water pressure equivalent to a depth of 10 metres for up to one hour when properly closed. It also says its storage products are not designed for intentional submersion and that the stated rating does not guarantee an electronic device will survive the pressure. Use the instructions for the exact model. For an evacuation, follow current official directions even if your paper map shows another route. Sea to Summit TPU Guide Map Case and Sea to Summit TPU Accessory Case
| Fit check | Record |
|---|---|
| Paper | Folded dimensions and section to keep visible |
| Candidate | Exact case model, size and chart weight |
| Opening | Confirmed access and clear viewing space with the real paper |
| Closure | Can be closed as directed without catching or crowding the contents |
| Storage | Actual bag pocket or other position where it must fit |
| Weather | Maker’s applicable limits and planned access in wet conditions |
Waterproof map case questions
Can I tell whether a standard sheet will fit from the size chart?
Use the listed dimensions to identify candidates. The opening, closure space and usable area need their own check with the sheet you intend to carry.
Which closure should I choose?
The press-lock map case and roll-top accessory pouch close differently. Try the exact format with the paper you need to access, and use the included instructions. Sea to Summit TPU Guide Map Case and Sea to Summit TPU Accessory Case
Can I count on an electronics device surviving immersion?
Follow the maker’s restrictions. The Accessory Case guidance explicitly excludes that guarantee and intentional submersion. Sea to Summit TPU Accessory Case
What should I compare when two sizes seem close?
Compare actual usable width and length, readable area and closure clearance. A size chart is most useful when you measure the paper and note which edge you need to insert first.
Measure the folded paper before buying
Mark the section you want to read, write down its dimensions and identify one case to check with the actual paper.