Skip to content

Water-resistant flashlights: Read the label and the right runtime row

Rugged black torch with a textured grip and covered switch on a side table
AI-generated editorial illustration

Choose a water-resistant flashlight by checking the maker’s exact durability label, the mode you need and how you can recharge it. Goal Zero labels its Lighthouse Micro Flash IPX6 in the manual. That is the manufacturer’s stated label for this model. The cited guide does not establish an immersion rating or independently verify protection for a particular exposure. Goal Zero Lighthouse Micro Flash user guide

Compare flashlight modes with flashlight modes

Goal Zero mode Maker-listed output Maker-listed runtime
Flashlight low 20 lumens 100 hours
Flashlight high 120 lumens 8.5 hours
Lantern one side low 10 lumens 170 hours
Lantern both sides high 150 lumens 7 hours

Keep each output and runtime on the same row. The 150-lumen figure applies to both sides of the lantern on high. The 170-hour figure applies to one side of the lantern on low. The manual does not claim that the flashlight produces 120 lumens for 100 hours. Use the numbers for comparison and check how the actual mode works for your task. Goal Zero Lighthouse Micro Flash user guide

Check charging and storage for the exact model

The maker lists USB input at 5 V and up to 1 A, and a 9.62 Wh lithium-ion battery. The manual lists 3.5 hours for its USB-source charge entry. It also lists 3.5 hours in full sun with the separately sold Nomad 7. Check the specific source you would use. The figures do not establish a time for every charger, panel or weather condition. The maker lists 0–40°C operating temperature and says to recharge every three to six months in storage. Goal Zero Lighthouse Micro Flash user guide

Use the evidence for one task

Decision What to record
Conditions Where you expect to use the light and what the maker verifies
Beam and mode The exact setting you intend to use
Duration How long you want the light for the task and which runtime row applies
Power Confirmed input, intended charging source and last recharge
Open question Exposure, task fit or charging detail you still need to check

For example, a household wants a handheld beam to find outdoor equipment. It compares the flashlight rows, tries both settings in ordinary dry conditions and checks the charging source. It keeps a separate light if the planned exposure falls outside what it can verify.

Read the manual beside the light

Confirm the model and intended mode. Record the matching output and runtime, then mark any exposure or charging question you still need to resolve.

Explore emergency lighting guides