Skip to content

How to decide whether an emergency shelter tarp belongs in your go bag

People holding up an orange tarp in a clearing.

Decide what job the tarp would do, who would carry it and where it would fit with the bag loaded for your actual evacuation route. Start with your destination, transport and the supplies you already depend on. Ready.gov’s evacuation guidance covers advance destinations, routes, transport arrangements and a portable go bag. Follow current instructions from local officials when they direct you to leave.

A tarp is one of the emergency shelter options on the National Park Service Ten Essentials list, alongside a tent, bivvy or space blanket. The list is for outdoor preparedness and also calls for clothing suited to the weather. Record the shelter options already in your plan, and keep the clothing and destination decisions visible while you assess another item.

Compare the bundle against your actual pack

AquaQuest’s Defender provides a documented heavy-duty example. Three adjacent chart columns show how the packed dimensions and weight change with the finished flat size. The maker’s chart separates all three measurements.

Nominal model Finished flat dimensions Listed weight Listed compressed dimensions
10 × 7 ft 9 ft 7 in × 6 ft 7 in 2.4 lb 7 × 7 × 5 in
10 × 10 ft 9 ft 7 in × 9 ft 7 in 3.3 lb 8.5 × 6 × 4.5 in
13 × 10 ft 12 ft 9 in × 9 ft 7 in 4.2 lb 10 × 6 × 4 in

The published weight applies to the chart entry. Weigh the actual bundle you intend to carry, including any separately documented items you have added. Use the flat dimensions to understand the sheet you are buying and check the actual shelter plan separately. Keep occupant capacity, protected space and use limits tied to evidence for the actual setup and conditions.

Run a bag access rehearsal

  1. Load the bag with the essentials you have already assigned to its carrier. Record the current weight and the openings that need to stay available.
  2. Use your own bundle or a clearly marked proxy of the measured packed size. Try the likely position in the bag without removing water, medications or accessibility supplies.
  3. Ask the carrier to close the bag and retrieve the items needed early in the trip. Check whether the tarp blocks the pocket or displaces an essential item.
  4. Review each expected transport leg. If the plan uses a lift, car and then a carried bag, record where the bundle travels during each handover. Update the plan if the load or available support changes.

Complete a carry and destination worksheet

Question What to record
What is the shelter job? The contingency you are preparing for and how it fits the planned destination.
Who carries the bundle? The actual carrier, their other assigned supplies and the fallback if the handover changes.
Where is it carried? Bag compartment or vehicle supply position for each leg of the route.
Can the carrier still reach essentials? A test with the packed bag, including the pocket openings that must stay clear.
What evidence goes with the plan? The exact product chart, included equipment and current local evacuation information.

Work through one transport change

Imagine two adults plan to ride with a neighbour and walk the final leg to their confirmed destination if a drop-off changes. One person packs the shared documents and water. The other tries a bundle matching the maker’s 8.5 × 6 × 4.5 in compressed dimensions for the nominal 10 × 10 ft model. Its listed 3.3 lb helps the household shortlist an option, and their loaded bag rehearsal shows where it would go and what they can still reach. They record who would move it from the vehicle and whether it still belongs in the carried kit. The route and destination plan remain usable if the extra equipment stays behind. Ready.gov evacuation guidance

Questions about a go-bag tarp

Which dimensions should I use to test the bag?

Use the compressed dimensions for the shortlist and measure the actual bundle and bag opening. The Defender chart gives a separate finished flat measurement for each size.

Do the tie-outs establish how I can use it?

Check the exact manufacturer documentation for the intended conditions and equipment. AquaQuest documents the tie-out construction and count, and the fit rehearsal addresses what you can carry and reach. Establish the requirements of any actual setup separately. AquaQuest Defender specification

What if the bundle crowds out the basics?

Restore access to the supplies the carrier already depends on and reconsider the bundle’s place in your transport plan. Keep destination, route and contact arrangements current. Use the National Park Service shelter and clothing checklist for the outdoor portion where relevant, and follow local evacuation guidance.

Your next practical step

Pick the next transport leg and run one loaded-bag rehearsal with the actual carrier. Record where the bundle goes, what stays accessible and who owns the handover before deciding to pack it.

Explore emergency warmth and shelter guides