Skip to content

Pack rain covers: How to fit a cover to a loaded backpack

Backpacks with grey fitted covers resting beside a tree.

Choose a pack rain cover by checking the shape of your packed bag, including anything strapped to the outside. Fit the cover and check that you can still use the harness and reach what you need. A cover helps shed rain, while the harness opening can still let wind-driven rain in. Pack documents, spare clothing and electronics in a separate protective layer. Sea to Summit Ultra-Sil Pack Cover specifications

Read the maker’s chart, then check your bag

Sea to Summit identifies the Medium Ultra-Sil Pack Cover for 50–70 L packs. Its specification chart lists the four rows below. The published dimensions describe the cover and are useful for shortlisting a size. How the cover fits also depends on the loaded bag’s shape and where its harness and attachments sit. Sea to Summit Ultra-Sil Pack Cover specifications

Size Maker-listed weight Maker-listed dimensions
XS 57 g / 2.0 oz 20 × 32 × 45 cm / 7.9 × 12.6 × 17.7 in
S 85 g / 3.0 oz 22 × 35 × 58 cm / 8.7 × 13.8 × 22.8 in
M 113 g / 4.0 oz 28 × 35 × 65 cm / 11.0 × 13.8 × 25.6 in
L 130 g / 4.6 oz 30 × 40 × 70 cm / 11.8 × 15.7 × 27.6 in

The maker describes 30D Ultra-Sil fabric, a shell without seams, a keeper strap across the pack harness on sizes S–L, an attached stuff sack and a drainage hole at the base. Check which features the specific size offers. Sea to Summit Ultra-Sil Pack Cover specifications

Measure and try the cover with your usual load

  1. Pack for the actual trip or evacuation plan. Fill the pockets you use. Attach any bedroll or other bulky item that normally travels outside the bag.
  2. Measure the widest points. Record height from the bottom to the tallest point, width across the fullest side pockets or attachments, and depth from the back panel to the farthest protrusion. Keep your dimensions in the same units as the chart.
  3. Try the cover on the whole load. Check that it seats over the corners and base. If there is a keeper strap, try fastening it with the bag set up as you would carry it. Check that you can adjust and remove the harness without fighting the cover.
  4. Check pocket access. Try reaching the item you are most likely to need while the cover is on. If its pocket is under the cover, decide where else to keep it.
  5. Inspect before packing away. Look for tears, holes, worn elastic and damaged fastenings. Check where the drainage opening sits when the cover is fitted, if the model has one.

These are editorial fit checks. Use the chart to choose what to try, and the actual packed bag to decide whether it fits.

Fit and compatibility worksheet

Check What to record If there is a problem
Loaded height × width × depth ___ × ___ × ___ Recheck the largest protrusions
Gear attached outside What it is and where it sits Try moving it before selecting another size
Cover edge around the pack Where it lifts or slips Try a different packing layout or cover
Harness and keeper strap, if fitted Whether you can fasten and adjust both Reposition the cover and check again
Light, map or bottle access Which pocket you can reach Move essential items to an accessible place
Moisture-sensitive items Which items have separate protection Pack them inside their own protective enclosure

Hypothetical example. A 55 L bug out bag carries a rolled mat on one side. Medium is within the maker’s stated volume range, but the mat makes it difficult to seat the edge in this example. The owner tries the cover again with the mat moved inside. The decision comes from the fit on the complete load, including whether the keeper strap and harness remain usable. Sea to Summit Ultra-Sil Pack Cover specifications

Frequently asked questions

Does a rain cover make my backpack waterproof?

No. Sea to Summit says wind-driven rain can enter between your back and the harness. Keep moisture-sensitive items separately protected inside the pack. Sea to Summit Ultra-Sil Pack Cover specifications

Can I rely on a pack cover if the bag goes under water?

No. Use the cover for its documented rain-shedding role. The maker’s cover features and drainage opening do not establish submersion or flood protection. Sea to Summit Ultra-Sil Pack Cover specifications

Do I need a larger cover if I strap gear outside?

Try the cover with those attachments in their actual positions. If the edge cannot seat securely, try moving the gear or shortlist a different size. Repeat the harness and pocket checks with any new configuration.

Do one fit check today

Pack your bag as you would carry it and fill in the first two worksheet rows. If you already own a cover, fit it and check whether you can reach your most-used pocket.

Explore bug out bags and evacuation guides